Category: Tapware Guide

Maintaining a clean and sparkling bathroom does not have to be a daunting task, and you do not have to rely on expensive cleaning products to keep dirt and grime at bay; there are various less expensive and natural tapware choices accessible in the kitchen cabinet. Adhere to our bathroom cleaning suggestions and you’ll have gleaming results in no time.

We understand how challenging it may be to maintain the beauty of your new bathroom, and the majority of us despise cleaning. As a consequence, we’ve created this helpful tapware cleaning and maintenance guide to assist you in maintaining the beauty of your bathroom for years to come.

Cleaning all bathroom objects on a regular basis is critical to preventing the formation of limescale, dirt, and grime.

If you’ve just moved into a new house, you may have seen little areas of rust at the foot of the tapware; these were most likely created by iron deposits on the tapware from the new water supply pipe. Remove the stains with a gentle cleanser; they should not recur unless the source of water remains contaminated.

Elimination of limescale

Limescale may be eliminated using a mild lemon juice solution or a vinegar and water solution in a 50:50 ratio. Allow about 5 minutes for the vinegar and water solution to rest before washing with warm water.

Bathroom ventilation

To help avoid mold development in your tapware, it is necessary to ventilate your bathroom, either by opening a window or installing an extractor fan.

While all of our tapware furniture is built of materials acceptable for use in a bathroom, we recommend keeping it away from the bath or shower to avoid water and soap residue splashes. If you are splashed with water, dry immediately. chek http://numericalrocks.com/effective-guidelines-for-selecting-the-correct-mixer-tapware/ link for selecting correct mixer tapware for your home.

Water pressure

Excessive water pressure may wreak havoc on plumbing components. Water pressure problems are often caused by trapped air in the pipes; this air may be eliminated by running the faucets for a few minutes. If you’ve just moved, you may notice that the water pressure is higher than you’re used to.

Steel baths

Steel bathtubs and faucets should be cleaned periodically with warm soapy water, then rinsed with clean water, dried, and polished as required with a soft cloth.

Cleaning your steel bath or tapware on a regular basis can assist prevent the collection of limescale. Certain proprietary cleaners may be detrimental to the enameled surface; as such, we strongly suggest you follow the manufacturer’s guidelines. Click here to learn more about limescale removal tips.

Avoid using bleach as it may cause the glossy surface to deteriorate. Strong disinfectants should always be used with caution and diluted.

Acrylic bathtubs

Acrylic bathtubs and tapware should be cleaned regularly with warm soapy water. In an ideal world, an acrylic bath would be cleaned immediately after each use, rinsed with cold water, and dried with a soft towel as needed.

Because acrylic is softer than ceramic and porcelain enamel, avoid using abrasive cleaning solutions and scouring powders to prevent harming the surface.

All contact with household chemicals, including paint strippers, hair dyes, carpet dyes, strong disinfectants, alcohol, perfume, aftershave, bleach, nail polish, and nail polish remover, should be avoided. Certain soaps and shampoos may even stain the acrylic if allowed to pool undiluted on the surface.

Shower enclosures

Enclosures for shower tapware should be carefully cleaned after each use to prevent the collection of filth and limescale. We highly recommend removing water droplets using a squeegee or a soft cloth but refrain from using harsh cleaning products. Shower gel and shampoo may also build, so rinse them completely with water. Remember to clean the sliding door track fittings to keep them operating properly.

Shower trays

Shower tray maintenance is simple; just clean with warm soapy water or a mild detergent and wipe dry with a soft towel after each usage. Never clean the surface with abrasive cleaners, since they may leave a mark. If the surface of the shower tray or tapware has fine scratches, T-cut may be applied and wiped away with a damp cloth. Additionally, the waste trap should be cleaned regularly, especially if the shower is utilized on a daily basis.

Plastic toilet seats

Clean plastic toilet seats on a regular basis with warm soapy water. Avoid using abrasive cleansers or scouring powders on the tapware surface, as they may cause damage.

Bathroom materials

The bathroom has a variety of materials, including glass, ceramic, and chrome. Adhere to our maintenance and cleaning guidelines for a range of materials.

Ceramic

Cleaning ceramic bathroom objects such as the basin and toilet on a regular basis with warm soapy water, rinsing with clean water, and, if required, drying and polishing with a soft cloth. Regular cleaning helps prevent the buildup of limescale, filth, and grime.

We recommend that before using a specialized cleaning solution on ceramic, you carefully read the instructions on the container, since some may cause damage to the glazed surface. Additionally, avoid storing aggressive cleaners such as bleach in ceramic goods overnight to prevent damaging the surface.

Glass

If you live in a hard water zone, avoid letting limescale to build up; if it does, removing it may be more difficult. Use a 50:50 mix of vinegar and water to remove limescale, but ensure that all vinegar is completely rinsed away. Additionally, limescale may be removed with a dilute lemon juice solution. Avoid strong detergents and cleaning chemicals at all costs, and never use abrasive products. If you must use a cleaning agent, choose one with a PH value between PH4 and PH8.

SUS304 stainless steel

Regular cleaning helps maintain the appearance of stainless steel tapware while also preventing corrosion and ensuring hygienic conditions. To clean stainless steel, just use warm soapy water or a light detergent, then rinse and dry with a soft towel. Caustic acids and disinfectants should be avoided. If a layer of filth accumulates, a specific stainless-steel cleaning solution may be used.

When using a proprietary cleaning, always follow the manufacturer’s instructions. Never use steel wool or steel wool soap pads, since they may leave rust stains.

Have you ever attempted to turn off a typical tapware that utilizes washers and discovered that it continued to leak despite your best efforts?

Have you ever had difficulty turning on a typical faucet due to it being shut off too tightly?

If this is the case, you can see why mixer taps are such a blessing.

We explore the most critical things to consider when buying the best mixer tapware in our tutorial, 5 simple tips for picking the correct mixer tapware.

Selecting mixer taps for your outlets may seem to be a no-brainer, and in some respects, you are accurate. However, if you’re unfamiliar with how they function, the many alternatives accessible to you, and the several fantastic features they provide, it’s easy to make the incorrect pick.

You can only gain if you are well-informed.

How do mixer taps work?

The first of our advice for selecting the finest mixer taps is to educate yourself about what mixer taps are.

Until 1985, the great majority of Australian houses employed the typical three-piece tapware layout. Then came Dorf, who revolutionized the industry by developing Australia’s first single lever mixer tap. It marked the start of a revolution in tapware design.

The key differences between mixer taps and other faucets are as follows:

In contrast to standard tapware, a mixer tap often has a ceramic cartridge rather than a washer. This eliminates the need to entirely shut off the water supply. It’s a straightforward, painless on/off motion done by sliding a lever.

A lever is used to operate the tap. A single mixer tap with a single control lever supplies both hot and cold water. You may adjust the ratio of hot and cold water as well as the pace at which the water flows by adjusting the lever’s position.

A dual lever mixer tapware is one that has a separate lever for the hot and cold taps, rather than a single lever for both. Due to the dual lever design, you can regulate the temperature simultaneously by changing both levers.

Which kind of outlet are you going to use to install the mixer tap?

The next step in choosing the proper mixer tap is establishing the output position. This collection of mixer tapware is intended for certain outlets and has advantages and functions that are suited for those outlets.

There are several mixer tapware available for the following applications:

• Showers\s
• Bath\s• Vanity\s
• Kitchen\s
• Laundry

Before using an outlet, verify if it is wall-mounted or bench-mounted.

Discover the several types of mixer taps available for basins.

The next stage in our guide to selecting the finest mixer tapware is to familiarize yourself with the alternatives accessible to you, as well as the pros and disadvantages of each. They all have one thing in common: a sense of style. They have the potential to be quite spectacular. The most popular design style is modern, and it may provide an air of elegance to a place.

The following is a list of mixer tapware samples and their associated characteristics:

• The structure is located on a high level. 
• Goose neck is a form of collar worn around the neck that is situated high above the basin, providing for ample of room underneath the faucet. As implied by the name, the rounded goose neck form provides enough room under the faucet.
• Take a step back and lower yourself. These tap heads are attached to a flexible hose that may be removed from the faucet and carried straight to the item or area that need cleaning.

• Swivel spout
• Filtered mixer taps with an easily-rotatable spout at the basin. The faucet’s functionality includes the ability to acquire clean filtered water.
• Pay particular attention to the mixer taps.
• Dual lever mixer taps with expanded levers that make turning them on and off easy, as well as features that help prevent infection. A lever controls each of the hot and cold faucets.

The following is a list of the most common types of mixer taps, along with their purposes.

It is important to educate yourself about the many types of mixer taps available for showers and tubs.

Along with an incredible collection of mixer tapware for sinks, we also offer a selection of mixer taps for the bath and shower. The following choices discuss the numerous kinds of diverter valves that may be fitted in mixer taps.

Diverter valves for shower mixer taps are most typically seen in the following configurations:

• Two-valve diverter. When utilizing a bath/shower combo system, this valve allows you to choose which exit the water comes from.
• Diverter valve with three positions (three-way diverter valve). You may send the water to one of three distinct outputs, depending on your preference: the bath, the shower head, or the rain shower (four-way diverter valve). This option will be used if you have four outlets, such as dual rain showers, a hand shower, and a bath. It enables you to direct water to one of four distinct spots.

By choosing the perfect shower mixer tapware, you may considerably enhance your bathroom experience.

Options for design and finish

The last consideration when selecting the appropriate mixer tapware is the design. What form of mixer tap best complements the décor of your place is a straightforward question to ask:

This is the point at which your own preferences come into play:

• Do you like the way your high-rise mixer tap compliments your vanity’s above-counter bowl?
• Is the goose neck pull out spray a show-stopper in the laundry?
• Is the look of the rail shower mixer tap in your shower correct?
• Do the finishes suit and enhance the other tapware in the area, as well as the space’s general style?

Final thoughts

If you’re looking to make quality selections as regards tapware, the tips mentioned in this article will veer you in the right direction and allow you to make the right choice. Feel free to go over this article again for proper grasping.